Basset Heating & Air Conditioning

MON–FRI: 8AM–7PM
24/7 EMERGENCY SERVICE:

719-496-8633

The online booking feature is no longer available. Please call our office for any scheduling needs. Sorry for the inconvenience.

Membership

Join the Basset Club
Plan Program

Save money on HVAC Repairs!

Join thousands of Colorado Springs and front-range residents who are enjoying the savings and peace of mind with the Basset Club Plan. Regular maintenance of your most expensive home system will keep you up and running. If repairs are needed, members receive significant discounts and priority scheduling.

Specialty Maintenance Programs for Fountain, CO Homeowners

Furnace & AC Tune-Ups

We perform maintenance twice a year on your furnace and AC system, saving you money by:

  • Reducing expensive breakdowns
  • Improving system efficiency
  • Increasing equipment life span
  • Detecting problems early

Regular maintenance also reduces the risk of carbon monoxide.

Perks and Benefits

New System Investment

Every year you stick with the Basset Club Plan, we set aside up to $100 that can go towards repairs or a new furnace or A/C system.

Do you know that over 80% of mechanical failures are eliminated by regular maintenance?

Significant Service Call & Repair Discounts

Members receive major discounts on emergency and regular services calls all year long, including holidays. Members also save up to 50% on any repair costs that are needed!

Refer and Save

If you refer four friends or family members to sign up for a club plan, yours is FREE and you still keep 100% of the benefits.

Furnace Tune Up

  • Replace standard air filter.
  • Inspect cabinet fasteners and cabinet panels.
  • Inspect electrical disconnect box.
  • Test thermostat operation.
  • Ensure proper grounding.
  • Inspect electrical connection and wires.
  • Inspect motor capacitors.
  • Check fan blade/blower wheel hub and clean blower compartment.
  • Inspect fan for free rotation.
  • Inspect condensate drain piping for proper operation, clean if needed.
  • Inspect and clean the burner compartment and check for signs of water corrosion and blockage.
  • Test inducer fan motor and blower assembly.
  • Visually inspect burners for signs of contamination.
  • Test main burner sequence and flame safety.
  • Test spark igniter, flame sensor, and associated wiring.
  • Measure and record carbon monoxide levels in the furnace room and air stream.
  • Perform a gas leak test.
  • Check for erratic flame during blower operation.
  • Check for proper combustion air volume.
  • Inspect vent exhaust for signs of corrosion, cracks, and blockage.
  • Measure and record line voltage.
  • Inspect and test connectors and relays.
  • Measure and record amperage draw to the blower motor.
  • Test variable frequency drive.
  • Inspect hot surface ignitor for cracks, check supply voltage and OHMs.
  • Lubricate moving parts.
  • Check pressure switch tubing circuit.
  • Clean pilot assembly.
  • Combustion analysis (checks the efficiency of the furnace).

Air Conditioner Tune Up

  • Replace the standard air filter.
  • Inspect cabinet fasteners and cabinet panels.
  • Inspect electrical disconnect box.
  • Test thermostat operation.
  • Ensure proper grounding.
  • Inspect electrical connection and wires.
  • Inspect motor capacitors.
  • Check fan blade/blower wheel hub and clean blower compartment
  • Inspect fan for free rotation.
  • Inspect condensate drain piping for proper operation, clean if needed.
  • Measure and record line voltage.
  • Inspect and test connectors and relays.
  • Measure and record amperage draw to the compressor.
  • Inspect drain pan and accessible drain for biological growth.
  • Inspect secondary drain line and overflow protection devices.
  • Measure and record dry bulb and wet bulb TD across the evaporator coil.
  • Record refrigerant suction and liquid line pressure
  • Inspect accessible refrigerant lines, components, and coil for leaks.
  • Inspect refrigerant line insulation.
  • Inspect electrical disconnect box.
  • If accessible, check the circuit board for hot spots and other damage.
  • Inspect condenser fan motor for loss of lubrication.
  • Clean condenser coil fan of dirt and inspect for hail damage.
  • Test reversing valve (heat pump only).
  • Confirm correct airflow using delta-treading and/or static pressure test.
  • Inspect coil fins if accessible.
  • Clean condensate drain pipe, p-trap, and drain line.
  • Test condensate pump.
  • Record superheat and sub cooling.
  • If accessible, clean evaporator coil.

Bassett Club Plan

 ANNUAL SERVICE PROGRAM BUILT TO PREVENT FAILURE AND SAVE YOU MONEY.

Receive regular maintenance in tune – ups to extend the life and efficiency of your system and prevent major failures. Plus, members receive major discounts on regular and emergency service calls all year long - including holidays - and priority scheduling.

SIGN UP TODAY

SERVICES

NO PLAN

POPULAR

CLUB PLAN

Repair Cost Discount

-

15% OFF

Extended Parts Warranty

-

2 YEARS

Service Call (8am-5pm Monday - Friday)

$89

FREE

Service Call (After Hours / Holidays)

$149 - $249

$89

New System Investment 

0% OFF

5% OFF

HVAC, Plumbing, Electrical Tune Up 

$149

FREE

Water Heater Safety Check

$89

FREE

30+ Point Inspection

-

FREE

Easy Service Reminders

-

FREE

Extended Equipment Life

-

FREE

Lower Utilities

-

FREE

Maintain Manufacturers Warranty

-

FREE

Priority Service Scheduling 

-

FREE

Share by: